Using the Built-in Flash
In indoors, low light, or backlit conditions, just
1 Press the <D> button.
In Creative Zone modes, you can press the <D> button anytime to take flash pictures.
While the flash is recycling, “DbuSY” is displayed in the viewfinder, and [BUSYD] is displayed on the upper left of the LCD monitor.
2 Press the shutter button halfway.
In the bottom left of the viewfinder, check that the <D> icon is lit.
3
Effective Flash Range
Take the picture.
When focus is achieved and you press the shutter button completely, the flash will fire for the picture.
[Approx. in meters / feet]
ISO | ||||
speed | Wide angle: 18mm | Telephoto: 55mm | Wide angle: 17mm | Telephoto: 85mm |
100 | 1 - 3.7 / 3.3 - 12.1 | 1 - 2.3 / 3.3 - 7.5 | 1 - 3.3 / 3.3 - 10.8 | 1 - 2.3 / 3.3 - 7.5 |
200 | 1 - 5.3 / 3.3 - 17.4 | 1 - 3.3 / 3.3 - 10.8 | 1 - 4.6 / 3.3 - 15.1 | 1 - 3.3 / 3.3 - 10.8 |
400 | 1 - 7.4 / 3.3 - 24.3 | 1 - 4.6 / 3.3 - 15.1 | 1 - 6.5 / 3.3 - 21.3 | 1 - 4.6 / 3.3 - 15.1 |
800 | 1 - 10.5 / 3.3 - 34.4 | 1 - 6.6 / 3.3 - 21.7 | 1 - 9.2 / 3.3 - 30.2 | 1 - 6.6 / 3.3 - 21.7 |
1600 | 1 - 14.9 / 3.3 - 48.9 | 1 - 9.3 / 3.3 - 30.5 | 1 - 13.0 / 3.3 - 42.7 | 1 - 9.3 / 3.3 - 30.5 |
If you shoot 20 images with flash at short intervals, the flash might stop operating. This is to protect the flash unit. If you press the shutter button halfway and “DbuSY” is displayed in the viewfinder (and [BUSYD] on the LCD monitor), wait until the display turns off. You can then use flash again.
54