2 BATTERY
2Battery
2.1Loading the Battery
The action grip of the camera also serves as a battery chamber cover and therefore must be removed to load a battery. To do this, press the release button and lift up the grip.
Use one of the batteries listed below or an equivalent of another brand:
Lithium 6V | Duracell PX 28L |
|
|
Alkaline - manganese 6V | Eveready (UCAR) |
| No. A544 IEC 4LR44 |
|
|
Silver Oxide 6V | Eveready (UCAR) |
| No. 544, |
| Durqceli PX 28, |
| IEC 4SR44 |
|
|
To ensure proper contact, wipe the battery terminals with a clean, dry cloth before loading. Load a new battery so that its terminals are in the directions indicated by the diagram inside the battery chamber. Insert the negative end first, then push down and insert the positive end. The camera will not function if the battery is loaded incorrectly.
Then slide the action grip’s tab into the guide hole as shown, and lower the grip until it locks in place.
6