1 - 25
3-3-4 SOLENOID CAM location
(1) Install the spring so that the Short end of the spring is at the top and the Long end of the spring is at
the bottom. (The part has a protection against reverse installation.)
Figure 1-15 SOLENOID CAM spring location
3-3-5 CARRIAGE SHAFT CLIP location
(1) Adjust the ellipse area of CARRIAGE SHAFT CLIP and the edge of TIMING SLIT STRIP FILM
Figure 1-16 CARRIAGE SHAFT CLIP location
SPRING
SOLENOID
CAM
SOLENOID
Red screws
Ellipse Area of
CARRIAGE SHAFT
CLIP