1 - 64

3-6-5 PRINT TEST
Select SHUKKEN of the PRINTER test from the FACTORY MODE menu to print out the print pattern.
The following items can be checked in the print pattern.
<EEPROM information contents>
On the service test print (sample below), confirm the EEPROM information as shown below. (The
information is given in the upper portion of the printout.)
<Print check items>
On the service test print (sample below), confirm the following items:
Check 1 nozzle check pattern: Ink shall be ejected from all nozzles
Check 2 top of form accuracy: The line shall not extend off the paper.
Check 3 vertical straight lines: The line shall not be broken.
Check 4 halftone: There shall be no remarkable streaks or unevenness.
xxxx Vx.xx USB(xxxxxx) FA=xx xx xx D = xxx . x CDR(xxxxxx, xxxxxx)
Destination (model name)
ROM Version
Ink absorber waste ink amount(%)
USB serial number
Reserve for factory use
CDR sensor correction value