Preparing the Camcorder
Removing the Monitor Unit 1 Set the Qswitch to OFF.
2Disconnect the monitor unit’s cables from the camcorder’s EXT 1 and EXT 2 terminals.
•Pull back the metallic tips of the cable to release the cable and then disconnect the cable. 3 Unscrew the lock screw and then gently slide out the monitor unit from the accessory shoe.
Using the Viewfinder
Adjusting the Viewfinder’s Position
1 Gently pull out the viewfinder until it stops.
2 Raise the viewfinder slightly and pull it out all the way.
3 Adjust the viewfinder’s angle as necessary.
• The viewfinder unit can be adjusted up to 60º vertically.
Attaching and Detaching the Eye Cup
Attach the eye cup so that it covers the rubber portion of the viewfinder unit.
• The dioptric adjustment dial can be operated even with the eye cup attached.
• For left eye use, attach the eye cup so that the protruding portion faces the opposite side.
35
Eye cup
Viewfinder unit
Detach the eye cup as shown in the illustration.