Special Recording Modes
4Press the START/STOP button again to stop recording.
•All of the recorded frames are joined together into one clip.
•The tally lamps go out and [INT STBY] appears at the top of the screen (with [INT] flashing).
94
NOTES
•You can use only one special recording mode at a time.
•While recording, you cannot change the interval or number of frames.
•Some frames at the point the recording was stopped may be recorded and added to the end of the clip.
•Interval recording mode will be deactivated if the special recording mode is changed or turned off. It will be deactivated also if you change the [wOther Functions] >[24.00P], [NTSC/PAL], [Bit Rate/Resolution] or [Frame Rate] setting.
•The time code advances by the number of frames recorded. If the running mode of the time code (A73) is set to [Free Run] or the time code is input from an external source, the running mode will switch to [Rec Run] during special recording mode. When special recording mode is deactivated, the running mode will return to its previous setting.
•During special recording mode, the time code signal will not be output from the TIME CODE terminal or HD/SD SDI terminal.
Frame Recording Mode
Set the number of frames in advance. We recommend operating the camcorder remotely or stabilizing the camcorder, for example, on a tripod. Sound is not recorded in this mode.
Configuring Frame Recording Mode 1 Open the [Rec Frames] submenu.
[wOther Functions] >[Frame Rec] >[Rec Frames]
2 Select the desired number of frames and then press SET.
• Available options depend on the frame rate used: 1, 3, 6 and 9 frames (when [wOther Functions] >[24.00P] is set to [On] or [Frame Rate] is set to [23.98P], [29.97P] or [59.94i]) or 2, 6 and 12 frames (when [wOther Functions] >[Frame Rate] is set to [25.00P], [50.00i], [50.00P] or [59.94P]).
Activating Frame Recording Mode and Recording 1 Open the [Special Rec] submenu.
[wOther Functions] >[Special Rec]
2 Select [Frame Rec] and then press SET.
• [FRM STBY] appears at the top of the screen (with [FRM] flashing).
3Press the START/STOP button to begin recording.
•The camcorder automatically records the set number of frames.
•The tally lamp illuminates.
•[FRM STBY] changes to [ÜFRM REC] while recording frames and [ÜFRM STBY] when frames are not being recorded.
•Repeat until you finish recording.
4Open the [Special Rec] submenu.
[wOther Functions] >[Special Rec]