Recording Audio
Activating the Microphone’s Attenuator
If the audio level is too high and the sound sounds distorted, activate the microphone attenuator (20 dB).
841 Open the [MIC Att.] submenu.
[¡Audio Setup] >[Audio Input] >[MIC Att.]
2 Select [On] and then press SET.
[¡Audio Setup]
[Audio Input]
[MIC Att.]
[Off]
Monitoring the Audio with Headphones
Connect headphones* to the ×(headphone) terminal to monitor the recorded audio. Press the HEADPHONE +/- buttons to adjust the volume.
* For PAL recordings, use commercially available headphones with a cable no longer than 3 m.
×(headphone) terminal
NOTES
• You can also adjust the headphone volume with the [¡Audio Setup] >[Audio Output] >[Headphone Volume] setting.
HEADPHONE +/- buttons