Canon HF11 instruction manual Important Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

In these safety instructions the word “product” refers to the Canon HD Camcorder VIXIA HF11 A and all its accessories.

1Read Instructions — All the safety and operating instructions should be read before the product is operated.

2Retain Instructions — The safety and operating instructions should be retained for future reference.

3Heed Warnings — All warnings on the product and in the operating instructions should be adhered to.

4Follow Instructions — All operating and maintenance instructions should be followed.

5Cleaning — Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. The product should be cleaned only as recommended in this manual.

6Accessories — Do not use accessories not recommended in this manual as they may be hazardous.

7Avoid magnetic or electric fields — Do not use the camera close to TV transmitters, portable communication devices or other sources of electric or magnetic radiation. They may cause picture interference, or permanently damage the camera.

8Water and Moisture — Hazard of electric shock

— Do not use this product near water or in rainy/ moist situations.

9Placing or Moving — Do not place on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product.

A product and cart

combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10Power Sources — The CA-570 Compact Power Adapter should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. Regarding other power sources such as battery power, refer to instructions in this manual.

11Polarization — The CA-570 Compact Power Adapter is equipped with a polarized 2-prong plug (a plug having one blade wider than the other).

The 2-prong polarized plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12Power Cord Protection — Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to plugs and the point from which the cords exit the product.

13Outdoor Antenna Grounding — If an outside antenna is connected to the product, be sure the antenna is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI / NFPA No. 70—1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See figure 1.

Fig. 1 EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRICAL CODE
	ANTENNA LEAD
	IN WIRE
GROUND	ANTENNA DISCHARGE UNIT
CLAMP
	(NEC SECTION 810-20)
ELECTRIC	GROUNDING CONDUCTORS
SERVICE	(NEC SECTION 810-21)
EQUIPMENT
	GROUND CLAMPS
	POWER SERVICE GROUNDING
NEC - NATIONAL	ELECTRODE SYSTEM
ELECTRICAL CODE	(NEC ART 250. PART H)

3