Canon HF11 instruction manual Press the start button on the DVD burner

4Press the start button on the DVD burner.

•A progress bar will be displayed on the screen.

•After pressing the start button (while the current disc is being written) the operation cannot be canceled.

•When the last disc is finalized, [TASK COMPLETED] will be displayed. Take out the disc and close the disc tray.

WHEN THE DATA REQUIRES MULTIPLE DISCS

After a disc is finalized it will be ejected automatically and [INSERT A NEW/

BLANK DISC AND CLOSE THE DISC TRAY] will appear. Insert the next disc and close the disc tray.

TO CREATE AN ADDITIONAL COPY OF THE SAME DISC

After the operation is finished, [INSERT A NEW/BLANK DISC] will be displayed again. Insert a brand new disc and close the disc tray.

IMPORTANT

•Discs created with the optional DW-100 DVD Burner that contain recordings in MXP mode (24 Mbps) cannot be played back on AVCHD-compatible DVD players or Blu-ray Disc players (as of June 2008). Use the DW-100 to play back such discs ( 86). Do not insert such discs into a device that is not compatible with MXP mode as you may not be able to eject the disc.

•Discs with recordings in FXP/XP+/SP/ LP mode created using the optional DW-100 DVD Burner can be played back only with AVCHD-compatible DVD players. Do not insert a high-definition disc into a DVD player that is not compatible with AVCHD specifications as you may not be able to eject the disc.

•While the camcorder is connected to the DVD burner, do not open the memory card slot cover and do not remove the memory card.

•Observe the following precautions while the ACCESS indicator on the camcorder is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the memory card slot cover.

-Do not disconnect the USB cable.

-Do not disconnect the power source or turn off the camcorder or the DVD burner.

NOTES

If a scene does not fit on a disc, a portion will be saved on the disc and the remaining portion will be saved on the next disc.

85