Canon HF11 Transferring Photos to a Computer Direct Transfer, Connecting, Camcorder Stop playback

( 26)

Connecting

Connect the camcorder to the VCR

using Connection . Refer to Connection Diagrams ( 80).

Recording

1External device: Load a blank cassette or disc and set the device to record pause mode.

2Camcorder: Locate the scene you wish to copy and pause playback shortly before the scene.

3Camcorder: Resume the movie playback.

4External device: Begin recording when the scene you wish to copy appears. Stop recording when copying is complete.

5Camcorder: Stop playback.

NOTES

•If remaining battery time is an issue, you can power the camcorder using the compact power adapter so the battery pack will not be consumed.

•By default, on-screen displays will be embedded in the output video signal. You can change the displays by repeatedly pressing DISP. ( 55).

Transferring Photos to a Computer (Direct Transfer)

With the software supplied on the

DIGITAL VIDEO Solution Disk CD-ROM you can transfer still images to a computer simply by pressing .

Refer also to the relevant sections in the “Digital Video Software” instruction manual (PDF file).

( 26)

Preparations

Install the software before you connect the camcorder to the computer for the first time. (Windows users only: you also need to select CameraWindow's auto-launch setting.) After that, just connect the camcorder to the computer (steps 2 and 3) and proceed directly to transfer the still images ( 89).

1Install the supplied Digital Video Software.

Refer to the installation guide (separate leaflet included with the CD-ROM).

2Set the camcorder to mode. Select in advance the memory from which you want to transfer still images ( 65).

3Connect the camcorder to the computer using the USB cable.

•Connection . Refer to Connection Diagrams ( 80).

•If the device type selection screen

appears, select [PC/PRINTER] and

press .

87