Canon HF20 A Selecting an Option from the FUNC. Menu, Selecting an Option from the Setup Menus, Press, menus, 1 Press FUNC, 1 Press FUNC, press to open the setup

Selecting an Option from the FUNC. Menu

The following is an example of selecting a FUNC. menu option in

mode (the operation is similar in mode). In playback modes, the operation varies depending on the function selected so refer to the relevant chapter as necessary.

1 Press FUNC. .

2 Select () the icon of the function you want to change from the left side column.

Menu items not available will appear grayed out.

3Select () the desired setting from the available options at the bottom bar.

•The selected option will be highlighted in orange.

•With some settings you will need to make further selections and/or

press . Follow the additional operation guides that will appear on

the screen (such as the icon, small arrows, etc.).

4Press FUNC. to save the settings and close the menu. You can press FUNC. to close the menu at any time.

Selecting an Option from the Setup Menus

1 Press FUNC. .

2 Select (, ) [ Menu] and

press to open the setup

menus.

You can also hold FUNC. pressed down for more than 1 second or press MENU on the wireless controller to open directly the setup menus screen.

3 Select () the tab of the desired menu.

4Select () the setting you want to change and press .

•The orange selection bar indicates the menu setting currently selected. Menu items not available appear grayed out.

Preparations Š 37