JVC RX-DP10VBK Selecting the Sub-RoomSource to Play, Adjusting the Sub-RoomVolume, On the unit

Selecting the Sub-Room Source to Play

Press one of the source selecting buttons.

DVD DVD MULTI VCR 1 VCR 2 TV/DBS VIDEO CD PHONO TAPE/MD CDR FM AM

On the unit

			SPEAKERS 1 SUB ROOM
			VOLUME
			dB
Selected source name		The sub-room volume
		level appears.
DVD	DVD MULTI	PHONO	CD
VCR 1	VCR 2	TAPE/MD	CDR
TV/DBS	VIDEO	FM	AM

Adjusting the Sub-Room Volume

MASTER VOLUME

On the unit:
To increase the volume, turn MASTER
VOLUME clockwise.
To decrease the volume, turn it	Down
counterclockwise.		Up

•When you turn MASTER VOLUME rapidly, the volume level also changes rapidly.

•When you turn MASTER VOLUME slowly, the volume level also changes slowly.

From the remote control:

To increase the volume, press VOLUME +.	VOLUME
To decrease the volume, press VOLUME –.

CAUTIONS:

•Always set the volume to the minimum before starting any source. If the volume is set at a high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.

•Be careful not to turn up the volume so high when controlling the receiver without listening to the playback sound. For example, when adjusting the volume level in the sub-room from the main room.

	On the remote control
DVD	: Selects the DVD player.
VCR 1	: Selects the video component connected to the VCR
	1 jacks.
VCR 2	: Selects the video component connected to the VCR
	2 jacks.
TV/DBS	: Selects the DBS tuner.
	• Does not work for selecting TV.
VIDEO	: Selects the video component connected to the
	VIDEO jacks.
CD*	: Selects the CD player.
PHONO* : Selects the turntable.
TAPE/MD* : Selects the cassette deck (or the MD recorder).
CDR*	: Selects the CD recorder.
FM*	: Select an FM broadcast.
AM*	: Selects an AM broadcast.

Notes:

•When you press one of the source selecting buttons on the remote control marked with an asterisk (*), the receiver automatically turns on. If you turn on the receiver with MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector set to “MAIN ROOM”, press SUB ROOM ON/OFF to activate the sub-room operations.

–Pressing one of the audio source selecting buttons on the remote control (except FM and AM) with the MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector set to “SUB ROOM” while the receiver is turned on but the sub-room is turned off, the sub-room is turned on with the audio source selected.

•You cannot select the following as the sub-room source:

–“TV”

–“DVD MULTI”

–Any digital input

You can only select the analog input as the sub-room source. (If analog connections have not been done, no sound comes out of the sub-room speakers.)

Notes:

•The volume level can be adjusted within the range of “– – – dB” (minimum) to “+18.0 dB” (maximum).

•With “SUBROOM PREOUT” set to “FIXED” (see page 40), no sounds come out of the SUB ROOM PREOUT jacks if the volume level is set to “– – – dB.” If this case, increasing the volume level will enable the sound output through the SUB ROOM PREOUT jacks.

29