JVC RX-DP10VBK manual Sound Adjustments, Adjustment Menu Configuration

Sound Adjustments

When performing the sound adjustments, it is recommended to use the remote control so that you can show the on-screen display menu on the TV.

•When using the buttons on the unit, you can perform the same settings referring to the indications shown on the main unit’s display. (The following on-screen display menus cannot be shown if you use the buttons on the unit.)

•Sound adjustment operations are only possible while the receiver is ready for the main room operations.

Adjustment Menu Configuration

	1 LEVEL
ADJUST MENU	(See page 37.)

ADJUST MENU

LEVEL

PARAMETRIC EQ

DSP PARAMETER

CENTER CHANNEL

:ENTER :EXIT

LEVEL
TEST TONE	:OFF
FRONT L LEVEL:		0dB
CENTER LEVEL	:	0dB
FRONT R LEVEL:		0dB
SURR R LEVEL	:	0dB
SBACK R LEVEL:		0dB
SBACK L LEVEL:		0dB
SURR L LEVEL	:	0dB
SUBWOOFER	:	0dB
:OPERATE		:BACK

2PARAMETRIC EQ (See page 37.)

PARAMETRIC EQ
FRONT
CENTER
SURROUND
SURROUND BACK
	:ENTER
	:BACK
3 DSP PARAMETER
(See page 38.)
DSP PARAMETER
EFFECT LEVEL	:3
ROOM SIZE	:3
LIVENESS	:3
WALL TYPE	:3
SEAT POSITION:1
	:OPERATE
	:BACK
4 CENTER CHANNEL
(See page 38.)
CENTER CHANNEL
CENTER EQ	: OFF
CENTER ALINMENT: OFF
	:OPERATE

:BACK

PEQ FRONT (See page 38.)

PEQ FRONT
BASS FREQ	:	100Hz
BASS LEVEL	:	0dB
MID FREQ	: 1.0kHz
MID LEVEL	:	0dB
TREBLE FREQ	:10.0kHz
TREBLE LEVEL:		0dB

:OPERATE :BACK

PEQ CENTER (See page 38.)

PEQ CENTER
BASS FREQ	:	100Hz
BASS LEVEL	:	0dB
MID FREQ	: 1.0kHz
MID LEVEL	:	0dB
TREBLE FREQ	:10.0kHz
TREBLE LEVEL:		0dB

:OPERATE :BACK

PEQ SURROUND (See page 38.)

PEQ SURROUND
BASS FREQ	:	100Hz
BASS LEVEL	:	0dB
MID FREQ	: 1.0kHz
MID LEVEL	:	0dB
TREBLE FREQ	:10.0kHz
TREBLE LEVEL:		0dB

:OPERATE :BACK

PEQ SURR(ound) BACK (See page 38.)

NOTICE—

•If Line Direct is in use (see page 25), you cannot make any sound adjustments using the Adjustment Menu.

•Items on the menus shown above are all set to the initial values when shipped from the factory.

•Some of the menus or some items on the menu cannot be shown or cannot be adjusted. (For details, see the respective explanation in this section.)

PEQ SURR BACK

BASS FREQ : 100Hz BASS LEVEL : 0dB MID FREQ : 1.0kHz MID LEVEL : 0dB TREBLE FREQ :10.0kHz TREBLE LEVEL: 0dB

:OPERATE :BACK

Note:

When performing sound adjustments viewing the indications on the main unit’s display, the indications shown are slightly different from what is shown on the on-screen display.

This is because of the limited number of characters shown on the main unit’s display.

Ex. • “FRONT L LEVEL” is shown as “FRONT L LVL” on the main unit’s display.

•“CENTER LEVEL” is shown as “CENTER LVL” on the main unit’s display.

41