JVC RX-DP10VBK Using Preset Tuning, Press SET inside the front door, Press RIGHT or LEFT inside

Using Preset Tuning

Once a station is assigned to a channel number, the station can be quickly tuned in. You can preset up to 30 FM and 15 AM stations.

To store the preset stations

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the unit ONLY:

To tune into a preset station

On the unit:

1. Press FM or AM.

The last received station is tuned in.

2.Press RIGHT or LEFT (inside the front door) until you find the channel you want.

•Pressing RIGHT increases the numbers.

•Pressing LEFT decreases the numbers.

FM AM

LEFT RIGHT

1.Tune into an FM or AM station you want to preset (see “Tuning into Stations Manually” on page 31).

•If you want to store the FM reception mode for an FM station, select the FM reception mode you want. See “Selecting the FM Reception Mode.”

ANALOG	TUNED	STEREO
L	R	SPEAKERS 1
SUBWFR		VOLUME

dB

2. Press SET (inside the front door). SET

ANALOG	TUNED	STEREO
L	R	SPEAKERS 1

From the remote control:

1. Press FM or AM.

The last received station is tuned in.

2.Press the 10 keys to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10 then 5.

•For channel number 20, press +10 then 10.

•For channel number 30, press +10, +10, then 10.

Note:

FM		AM
		EFFECT
1	2	3
		ROOM SIZE
4	5	6
		LIVENESS
7/P	8	9
		WALL
10	0	+10
RETURN	FM MODE	100+

SUBWFR VOLUME

dB

The channel number position starts flashing on the display for about 10 seconds.

3. Press RIGHT or LEFT (inside	LEFT	RIGHT
the front door) to select a
channel number while the
channel number position is
flashing.
ANALOG		SPEAKERS 1
L R
SUBWFR		VOLUME

dB

4. Press SET again while the selected

SET

channel number is flashing on the display.

The selected channel number stops flashing.

The station is assigned to the selected channel number.

ANALOG		SPEAKERS	1
L	R
SUBWFR			VOLUME

dB

5.Repeat steps 1 to 4 until you store all the FM and AM stations you want.

To erase a stored preset station

Storing a new station on a used number erases the previously stored one.

You can only select the same station of the same band (FM or AM) both for the main room and sub-room operations. If you change the station for the sub-room, it also changes for the main room (and vice versa: indications in the main display also change). This also means that if you change the station for the sub-room while recording a broadcasting program in the main room, recording in the main room will be interrupted.

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy

You can change the FM reception mode while receiving an FM broadcast.

• You can store the FM reception mode for each preset station.

Press FM MODE.

•Each time you press the button, the FM reception mode alternates between “AUTO MUTING” and “MONO.”

FM MODE

0

FM MODE

On the unit	On the remote control
(inside the front door)

AUTO MUTING: When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display.

MONO: Reception will be improved although you will lose the stereo effect. In this mode, you will hear noise while tuning into the stations. The AUTO MUTING and STEREO indicators go off from the display.

Note:

When you press FM MODE on the remote control, be sure that “TUNER” appears on the remote’s display. If not, press FM first, then press FM MODE.

32