Activating the Main Room Front Speakers
When shipped from the factory, both pairs of the front speakers have been set to be used in the main room.
•To use the front speakers connected to the FRONT 2/SUB ROOM SPEAKERS terminals in the
IMPORTANT:
You can activate two pairs of the front speakers at the same time only when the SPEAKER LOAD SELECTOR switch on the rear panel is set to the “HIGH” position and when signals are sent only to the front speakers. Otherwise, activating one pair of the speakers deactivates the other.
On the unit ONLY:
When you have connected two pairs of the front speakers and place them in the main room, you can select which to use.
To use the speakers connected to the FRONT
Selecting the Analog or Digital Input Mode
When you have connected digital source components using the digital terminals (see page 14), you need to select the digital input mode.
Before you start, remember...
•The digital input (DIGITAL IN) terminal setting should be correctly done for the sources you want to select the digital input mode for (see “Setting the Digital Input Terminals— DIGITAL IN” on page 38). Without setting this digital input terminal correctly, you cannot change the input mode from analog input to digital input even if you follow the procedure below.
•The digital input can be used for the main room sources. The analog input is always selected as the
1.Press one of the source selecting buttons (DVD, VCR1, TV/DBS, CD, CDR, or TAPE/MD)* for which you want to change the input mode.
1 SPEAKERS terminals, press SPEAKERS 1 (inside the front door) so that the speakers 1 indicator lights up on the display. (Make sure
SPEAKERS 1
DVD DVD MULTI VCR 1 VCR 2 TV/DBS VIDEO CD PHONO TAPE/MD CDR FM AM
that the front speakers 2 indicator is not lit on the display.)
To use the speakers connected to the FRONT 2/SUB ROOM
SPEAKERS terminals, press SPEAKERS 2/SUB ROOM (inside the front door) so that the front speakers 2 indicator lights up on the display. (Make sure that the front speakers 1 indicator is not lit on the display.)
To use both sets of the speakers, press SPEAKERS 1 and SPEAKERS 2/SUB ROOM so that the front speakers 1 and 2 indicators light up on the display.
To use neither sets of the speakers, press SPEAKERS 1 and SPEAKERS 2/SUB ROOM so that the front speakers 1 and 2 indicators disappear from the display.
(“HEADPHONE” appears on the unit’s display).
Note:
In the following cases, the speakers connected to the FRONT 2/SUB ROOM SPEAKERS terminals are deactivated even if both pairs of the front speakers are activated.
–If you select “DVD MULTI” as the source.
–If you select any of the Surround/DSP modes which activates the center and/or surround speaker(s).
Listening only with headphones:
Sounds through the front speakers and the subwoofer shut off when connecting a pair of headphones to the PHONES jack. (“HEADPHONE” appears on the unit’s display.)
You can enjoy the following sounds through the headphones:
•If the Surround mode is activated, you can enjoy surround effect. (For details, see “3D HEADPHONE Mode” on page 47.)
•If a DSP mode is activated, you can enjoy the DSP effect. (For details, see “HEADPHONE Mode” on page 51.)
CAUTION:
Be sure to turn down the volume before connecting or putting on headphones, as high volume can damage both the headphones and your hearing.
On the unit
DVD | DVD MULTI | PHONO | CD |
VCR 1 | VCR 2 | TAPE/MD | CDR |
TV/DBS | VIDEO | FM | AM |
On the remote control
Note:
*You can select the digital input only for the sources which you have selected the digital input terminals for. (See “Setting the Digital Input
In addition, when “TAPE” has been assigned as the source name to the TAPE/MD button, it does not work in this step.
To change the source name, see “Changing the Source Name” on page 25.
2.Press INPUT MODE/INPUT ATT (or ANALOG/ DIGITAL INPUT) to change the input mode.
•Each time you press the button, the input mode changes as follows:
INPUT MODE | ANALOG/DIGITAL |
| |
/ INPUT ATT | INPUT |
|
On the unit | On the remote control | |
(inside the front door) |
| |
|
| |
ANALOG | SPEAKERS 1 | |
L R | ||
| ||
SUBWFR | VOLUME |
dB
|
| DIGITAL AUTO |
|
L | R | SPEAKERS | 1 |
|
| ||
SUBWFR | LFE | DIGITAL | VOLUME |
LS | RS |
|
|
dB
23
