JVC RX-DP10VBK Activating the Sub-RoomFront Speakers, Press SPEAKERS 2/SUB ROOM to, Lights up

Models: RX-DP10VBK

1 83
Download 83 pages 4.48 Kb
Page 33
Image 33
Activating the Sub-Room Front Speakers

Activating the Sub-Room Front Speakers

This section is NOT applicable to those who connect the sub- room front speakers to the SUB ROOM PREOUT jacks using another amplifier (see page 17).

Before you start, remember...

When shipped from the factory, both pairs of the front speakers have been set to be used in the main room. To use the front speakers connected to the FRONT 2/SUB ROOM SPEAKERS terminals in the sub-room, see “Preparing for the Sub-Room Operations—SUB ROOM” on page 40.

On the unit ONLY:

Press SPEAKERS 2/SUB ROOM to

/ SUB ROOM

 

 

 

SPEAKERS 2

 

activate the sub-room front speakers.

 

 

 

 

The SUB ROOM speaker indicator lights up on

 

 

the display.

Lights up

 

 

 

 

 

 

 

SPEAKERS 1 SUB ROOM

 

 

VOLUME

 

 

 

dB

 

 

 

 

To deactivate the sub-room front speakers, press

SPEAKERS 2/SUB ROOM again.

The SUB ROOM speaker indicator goes off.

Note:

If the center speaker or surround speakers are used for the Surround/ DSP mode (see pages 46 and 50) for the main room operations, the SPEAKERS 2/SUB ROOM button does not work.

For those who connect the sub-room front speakers to the SUB ROOM PREOUT jacks using another amplifier (see page 17).

You have to determine how to adjust the volume level through the sub-room front speakers. (See “Preparing for the Sub-Room Operations—SUB ROOM” on page 40 for more details.)

To use the sub-room front speakers

1Turn on the other amplifier connected to the SUB ROOM PREOUT jacks.

2Adjust the volume level of sub-room front speakers either on the other amplifier or on this receiver (depending on the SUB PREOUT setting on the SUB ROOM submenu).

Muting the Sub-Room Sound

From the remote control ONLY:

 

Press MUTING to mute the sound

MUTING

through the sub-room front speakers.

 

SPEAKERS 1

SUB ROOM

The volume level indicator goes off.

To restore the sound, press MUTING again so that the volume level indicator appears on the display.

Turning MASTER VOLUME on the unit or pressing VOLUME +/– on the remote control also restores the sound.

SPEAKERS 1

SUB ROOM

VOLUME

Press SPEAKERS 2/SUB ROOM to dB

Note:

Sounds through the sub-room speakers connected to the SUB ROOM PREOUT jacks are also muted.

30

Page 33
Image 33
JVC RX-DP10VBK Activating the Sub-RoomFront Speakers, Press SPEAKERS 2/SUB ROOM to, activate the sub-roomfront speakers