JVC RX-DP10VBK manual COMPU LINK Remote Control System, Notes, Automatic Source Selection

DOOR

DOWN

COMPU LINK Remote Control System

The COMPU LINK remote control system allows you to operate JVC audio components through this receiver.

To use this remote control system, you need to connect JVC audio components through the COMPU LINK (SYNCHRO) jacks (see below) in addition to the connections using cables with RCA pin plugs (see pages 9 and 10).

•Make sure that the AC power cords of these components are unplugged before connection. Plug the AC power cords only after all connections are complete.

CD player

CD recorder

Cassette deck

or

MD recorder

RX-DP10VBK

COMPU LINK – 4

(SYNCHRO)

Turntable

Notes:

•There are four versions of COMPU LINK remote control system. This receiver is equipped with the fourth version—COMPU LINK-4. This version is created by adding systematic operations with the CD recorder to the previous version—COMPU LINK-3.

•If your audio component has two COMPU LINK jacks, you can use either one. If it has only one COMPU LINK jack, connect it so that it is the last item in the series of components. (For example, the turntable or CD player on the left column.)

•To operate the cassette deck or MD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 25.)

•Refer also to the manuals supplied for your audio components.

This remote control system allows you to use four functions listed below.

Remote Control through the Remote Sensor on the Receiver

You can control the connected audio components through the receiver using this remote control. For details, see pages 64 and 65.

Automatic Source Selection

•When you press the play (3) button on a connected component or on its own remote control, the receiver automatically turns on and changes the main room source to the component.

ANALOG		SPEAKERS	1
L	R
SUBWFR			VOLUME

dB

IMPORTANT:

Check to see if the following before or while using the buttons and controls.

For the main room operations:

The MAIN ROOM ON/OFF lamp on the unit is lit.

For the sub-room operations:

The SUB ROOM ON/OFF lamp on the unit is lit.

•When using the unit:

–For the main room operations: “SUB ROOM” is not shown in main display.

–For the sub-room operations: “SUB ROOM” is shown in the main display.

– Press DOOR DOWN to use the buttons inside the front door.

To close the front door, press DOOR UP.

•When using the remote control:

When operating the receiver using the remote control, the display on the unit always shows the main room source information though you are operating it for the sub-room source.

–Set the MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector to “MAIN ROOM” or “SUB ROOM” correctly.

–Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode together with multi-room operation mode (either MAIN ROOM or SUB ROOM) for a while (10 or 5 seconds).

LEARN TRANSMIT

LEARN TRANSMIT

–If the receiver is already turned on with the SUB ROOM ON/OFF lamp on the unit lit, and source name for the sub-room appears on the display, the receiver changes the sub-room source to the component.

SPEAKERS 1 SUB ROOM

VOLUME

dB

•When you press PLAY on the remote control supplied for this receiver, the receiver

automatically turns on and changes the main	PLAY
room source or sub-room source to the target
component, depending on

MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector setting on the remote control.

•When you select a new source on the receiver or on the remote control supplied for this receiver either for the main room or sub- room, the newly selected component begins playing immediately, and the previously selected source continues playing without sound for a few seconds.

Note:

If the source changes from an analog source, for which Line Direct (see page 25) is activated, to a digital source, muting time* will be a little longer.

*The period during which the receiver changes the source mechanically. No sound comes out during this period.

MAIN ROOM SUB ROOM MAIN ROOM SUB ROOM

54