JVC RX-DP10VBK manual Digital Connections, Digital input terminals, Digital output terminal

Digital Connections

This receiver is equipped with five DIGITAL IN terminals—one digital coaxial terminal and four digital optical terminals—and one DIGITAL OUT terminal.

IMPORTANT:

•When connecting the DVD player, digital TV broadcast tuner, digital VCR, or DBS tuner using the digital terminals, you also need to connect it to the video terminal on the rear. Without connecting it to the video terminal, you cannot view any playback picture.

•After connecting the components using the DIGITAL IN terminals, set the following correctly if necessary.

–Set the digital input (DIGITAL IN) terminal setting correctly. For details, see “Setting the Digital Input Terminals—DIGITAL IN” on page 38.

–Select the digital input mode correctly. For details, see “Selecting the Analog or Digital Input Mode” on page 23.

Notes:

•When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components:

–DIGITAL 1 (coaxial): For DVD player

–DIGITAL 2 (optical): For CD player

–DIGITAL 3 (optical): For digital TV broadcast tuner

–DIGITAL 4 (optical): For CD recorder

–DIGITAL 5 (optical): For MD recorder

•When you want to operate the CD player, CD recorder, or MD recorder using the COMPU LINK remote control system, connect the target component also as described in “Analog connections” (see page 10).

•When you want to operate the VCR or DVD player using the AV COMPU LINK remote control system, connect the target component also as described in “Analog connections” (see pages 11, 13).

•To use the digital source components as the sub-room source, connect them using analog connection methods as well.

Digital input terminals

You can connect any digital component as follows:

Digital output terminal

CD recorder MD recorder

Digital TV

DVD player

DVD

DBS tuner

DBS

Digital VCR

CD player

Digital optical cable (not supplied) between digital optical terminals

CD recorder MD recorder

Digital coaxial cable (not supplied) between digital coaxial terminals

When the digital recording equipment such as an MD recorder and a CD recorder has a digital optical input terminal, connecting it to the DIGITAL OUT terminal enables you to perform digital-to- digital recording.

PCM

/ DOLBY DIGITAL

/ DTS

DIGITAL OUT

Digital optical cable (not supplied) between digital optical terminals

When the component has a digital coaxial output terminal, connect it to the DIGITAL 1 (DVD) terminal, using the digital coaxial cable (not supplied).

When the component has a digital optical output terminal, connect it to the DIGITAL 2 (CD), DIGITAL 3 (TV), DIGITAL 4 (CDR), or DIGITAL 5 (MD) terminal, using the digital optical cable (not supplied).

Before connecting a digital optical cable, unplug the protective plug.

Note:

The digital signal format of the signals output through the DIGITAL OUT terminal is the same as that of the input signal. This means that when the DTS Surround signals are input, the DTS Surround signals are output.

DIGITAL IN

DIGITAL 1 (DVD)

DIGITAL 2 (CD)

DIGITAL 3 (TV)

DIGITAL 4 (CDR)

DIGITAL 5 (MD)

14