Canon HF G10 Adjusting the Position and Brightness of the LCD Screen, NOTES, LCD Backlight, Rotating the LCD Panel, Preparing the Camcorder, Open the LCD panel 90 degrees

Preparing the Camcorder

Adjusting the Position and Brightness of the LCD Screen

Rotating the LCD Panel

Open the LCD panel 90 degrees.

•You can rotate the panel 90 degrees downward.

•You can rotate the panel 180 degrees toward the lens. Rotating the LCD panel 180 degrees can be

useful in the following cases:	23
- To allow the subject to monitor the LCD screen while you use the viewfinder.

-To include yourself in the picture when recording with the self timer.

-To allow the camcorder to be operated with the wireless controller from the front.

180° 180°

	Subject can monitor the LCD screen
90°	(You can use the viewfinder at the same time)

NOTES

•About the LCD and viewfinder screens: The screens are produced using extremely high-precision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black, red, blue or green dots. This has no effect on the recorded image and does not constitute a malfunction.

LCD Backlight

When recording in bright places it may be difficult to use the LCD screen. Turn on the LCD backlight to make it brighter.

With the camcorder on, hold hpressed down for more than 2 seconds.

• Repeat this action to switch the LCD backlight between off (normal) and on (bright).