Dividing Scenes

Dividing Scenes

You can divide scenes in order to leave out the best parts and later cut out the rest.

Operating modes:

1 Play back the scene you want to divide.

2 Pause the playback at the point where you want to divide the scene.

943 Open the scene division screen. [Edit] [Divide]

4Bring the scene to a precise point, if necessary.

Playback controls will appear on the screen (087). Use any special playback modes (fast playback, frame reverse/advance) as necessary to locate the desired point.

5Divide the scene. [A Divide] [Yes]

The video from the division point to the end of the scene will appear as a new scene in the index screen.

NOTES

When advancing/reversing frames while dividing the scenes, the interval between frames is about 0.5 seconds.

If the scene cannot be divided at the point where you paused the playback, advance/reverse a frame and then divide the scene.

During the playback of a scene that was divided, you may notice some anomalies in the picture/ sound at the point where the scene was cut.

The following scenes cannot be divided:

- Scenes that are too short (less than 3 seconds).

- Scenes that were transferred back to the camcorder using the supplied PIXELA's software.

Scenes cannot be divided within 1 second from the beginning or the end of the scene.