Video Scopes

Video Scopes

The camcorder can display a simplified waveform monitor. It can also display an edge monitor* to help you focus. The video scopes appear only on the LCD screen. They do not appear in the viewfinder or on an external monitor.

* The edge monitor looks at the focus of the entire picture and displays the results as a waveform.

Operating modes:

78

Displaying the Waveform Monitor during [AProgrammed AE] Recording Program

1Make sure the recording program is [AProgrammed AE]. [FUNC.] [Rec. Programs] [AProgrammed AE]

2Open the exposure adjustment screen. [FUNC.] [e Exposure]

3Touch [] (manual adjustment) and then touch [ ] (waveform monitor).

The waveform monitor will appear in a window on the screen. Touch the window to close it.

You can adjust the exposure using the dial at the bottom of the screen or by touching inside the e frame (059). You can see the results immediately in the waveform monitor.

Displaying the Waveform Monitor during [yManual Exposure] Recording Program

1Open the [yManual Exposure] screen.

[FUNC.] [Rec. Programs] [yManual Exposure]

2Touch [] (waveform monitor).

The waveform monitor will appear in a window on the screen. Touch the window to close it.

You can adjust the exposure by using the controls on the screen (058). You can see the results immediately in the waveform monitor.

Displaying the Edge Monitor

1Open the focus adjustment screen. [FUNC.] [X Focus]

2Touch [] (manual focus) and then touch [ ] (waveform monitor).

The edge monitor will appear at the bottom of the screen. Touch the edge monitor to close it.

You can adjust the focus using the focus dial or by touching the inside the X frame (046). You can see the results immediately in the edge monitor.