Canon HF R20, HF R200, HF R21 Capturing Photos, IMPORTANT, Operating modes:, When capturing photos on an, -Scenes shorter than 1 second, 4 Touch [B] to return to the index screen

•The captured video snapshot scene is saved to the same memory that contains the source scene.

•In the gallery screen, a captured video snapshot scene is saved in [Video Snapshot] as the last scene.

•Video snapshot scenes cannot be captured from any of the following types of scenes.

-Scenes shorter than 1 second

-Scenes that were edited using the supplied software PIXELA’s VideoBrowser and were then written back to the camcorder.

•When the source scene is itself a video snapshot scene, you may not be able to capture a video snapshot scene depending on the length of the source scene and the length currently selected for video snapshot scenes.

•When you start capturing a video snapshot scene less than 1 second from the end of the scene, the video snapshot scene will be captured starting from the beginning of the following scene.

•During the playback of video snapshot scenes captured from a previ- ously recorded movie, you may notice some anomalies in the picture/ sound at the point where the playback switches to a new scene.

Capturing Photos

You can capture a photo from a movie during playback. The size of the captured photos will be 1920x1080.

Please read the IMPORTANT section before using an Eye-Fi card.

Operating modes:

1Play back the scene from which you want to capture the photo.

2 Pause the playback at the point you want to capture. 3 Press jfully.

4 Touch [B] to return to the index screen.

IMPORTANT

•When capturing photos on an Eye-Fi card in memory card slot Y, pho- tos will be uploaded automatically when the camcorder is in playback mode if you are within the range of a configured network. Always verify that Eye-Fi cards have been approved in the country/region of use. See also Using an Eye-Fi card (0131).

Video Š 95