Print Results Not Satisfactory
Cannot Print to End of Job
|
| Cause | Action |
|
|
| In Windows XP and Windows 2000, click Print Options on the Page Setup |
|
|
| sheet. Then, select the Reduce spool data size check box in the displayed |
Size of the print data is extremely large | dialog. | ||
(Windows XP/Windows 2000 only). | Selecting Reduce spool data size may reduce the print quality. | ||
Part of the Page Is Not Printed
Cause | Action |
Page Size/Paper Size setting in the | If the page size setting, set in the application software you are printing from or in |
printer driver does not match the actual | the printer driver, does not match the actual size of the printing paper, part of the |
size of the paper loaded in the printer. | page may not be printed. |
| Check the page size setting in your application. Then, check Page Size on the |
| Page Setup sheet in the printer properties dialog box of the printer driver |
| (Windows) or Paper Size on the Page Setup dialog box of the printer driver |
| (Macintosh). |
Ink Does Not Come Out/Printing Does Not Start/Printing Is Blurred/ Colors Are Wrong/Straight Lines Are Misaligned
Cause | Action |
FINE Cartridge is not installed properly | Remove the FINE Cartridge, then reinstall it. |
/ There is no ink left. | Small dusts may be stuck between the contact points. In this case, the print |
| result may be improved by reinstalling the FINE Cartridge. |
Also, check that the protective tape (A) is removed.
| (A) |
|
|
Media Type setting in the printer driver | Make sure that the Media Type set in the Main sheet of the printer driver |
does not match the actual type of | (Windows) or the Quality & Media in the |
paper. | (Macintosh) matches the type of the loaded printing paper. |
44Troubleshooting