3. Fix iron rack
Use forceps to bend the rack (3-3-1) (This is to let the sponge sticker stick to the printer body tightly). Tear off the cover of sticker, stick the rack to the printer body strictly according to the indicated position and size (3-3-2. 3-3-3), do not twist the ink tube (3-3-4).
Pic. 3-3-1 | Pic. 3-3-2 | Pic. 3-3-3 |
4. Check tube length
Move cartridge holder to the left side (3-4-1), then right side (3-4-2) and check whether ink tube is too long or too short. Move cartridge holder to the cartridge- changing place and check whether Ink tube will fall on the paper board.
Pic. 3-4-1 | Pic. 3-4-2 | Pic. 3-4-3 |
5. Adjust the ink tube length
If step 4 is ok, then there is no need to go through this step.
If the tube length is too short then lengthen it (3-5-1, 3-5-2), if too long then shorten (3-5-3, 3-5-4). If the tube falls down, you need adjust the angle of sticker to prevent falling (3-5-5).
Pic. 3-5-1 | Pic. 3-5-2 | |
INSTALLATION MANUAL ON CISS FOR PRINTER CANON IP 1500 | 3 |
