Indicators

The camera indicators light or flash under the following circumstances.

Never do the following while a green indicator is flashing. These actions may corrupt image data.

-Shake or jolt the camera

-Shut off the power, or open the memory card slot/battery cover

Upper Indicator

Green:

Ready to shoot

Blinking Green:

Image recording/reading/erasing/transferring

 

(when connected to a computer)

Orange:

Ready to shoot (flash on)

Blinking Orange: Ready to shoot (camera shake warning)

Lower Indicator

Yellow:

Macro mode/infinity mode/AF lock mode

Blinking Yellow:

Focusing difficulty (camera beeps once)

Power Saving Function

This camera is equipped with a power saving function. The power will shut off in the following circumstances. Press the power button again to restore power.

Shooting Mode

Powers down approximately 3 minutes after the last

 

control is accessed on the camera. The LCD monitor

 

automatically turns off 1 minute* after the last control is

 

accessed even if [Auto Power Down] is set to [Off].

 

Press any button other than the power button or change

 

the camera orientation to turn the LCD monitor back on.

Playback Mode

Powers down approximately 5 minutes after the last

Connected to a Printer

control is accessed on the camera.

* This time can be changed.

The power saving function will not activate during a slide show or while the camera is connected to a computer.

The power saving function settings can be changed (p. 29).

22

Page 24
Image 24
Canon IXUS 800 IS appendix Indicators, Power Saving Function, Upper Indicator, Lower Indicator, Shooting Mode