56
Use the LCD monitor to confirm that the image was
recorded at the desired brightness.
Please note that cam era shake becomes a factor at low
shutter speeds. Set IS mode to a setting ot her than [Off] , or
shoot with the camera attached to a tripod.
Use of the flash may r esult in an over-e xposed image. If
this occurs, shoot with the flash set to .
The following are unavailable:
- Exposure Compensation
-Metering
-AE Lock
-FE Lock
- ISO speed: Auto, High ISO Auto
- Flash: Auto, Auto Red-eye Re duction
The nature of CCD image sensors is such that noise in the
recorded image increases at long shutter speeds. This
camera, however, applies special processing to images shot
at shutter speeds slower than 1.3 seconds to eliminate the
noise, thereby produci ng high-quality imag es. A certain
amount of processing time, however, may be required before
the next image can be shot.