Connecting to a TV 183
You can use the supplied AV cable to shoot or playback images using
a TV.

Shooting/Playback Using a TV

1Turn off the camera and the TV.
2Connect the AV cable to
the camera’s A/V OUT ter-
minal.
Open the terminal cover by slipping
a fingernail under the upper edge
and plug the AV cable in all the way.
3Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
4Turn on the TV and switch it to video mode.
5Turn on the camera.
zThe video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p.52). The
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
zIf the video system is set incorrectly, the camera output may
not display properly.

Connecting to a TV

VIDEO
IN
Yellow
Black
AUDIO