Canon IXUS 860 IS appendix Indicator, Power Saving Function

Models: IXUS 860 IS

1 234
Download 234 pages 27.63 Kb
Page 47
Image 47

Components Guide

45

Indicator

The indicator on the back of the camera lights or blinks under the following conditions.

Green:Ready to shoot (camera beeps twice)*/connected to computer/display off

Blinking Green: Camera starting up/Time Lapse (movie) recording/ Image recording/reading/erasing/transferring (when connected to a computer/printer)

Orange: Ready to shoot (flash on)

Blinking Orange: Ready to shoot (camera shake warning)

* Camera beeps once if difficult to focus.

Never do the following while the indicator blinks green. These actions may corrupt image data.

-Shake or jolt the camera

-Turn off the camera, or open the memory card slot/battery cover

Power Saving Function

This camera is equipped with a power saving function. The power will shut off in the following circumstances. Press the power button again to restore power.

Shooting Mode

Powers down approximately 3 minutes after the

 

last control is accessed on the camera. The LCD

 

monitor automatically turns off 1 minute* after

 

the last control is accessed even if [Auto Power

 

Down] is set to [Off]. Press any button other than

 

the power button or change the camera

 

orientation to turn the LCD monitor back on.

Playback Mode

Powers down approximately 5 minutes after the

Connected to a Printer

last control is accessed on the camera.

* This time can be changed.

zThe power saving function will not activate during a slide show or while the camera is connected to a computer.

zThe power saving function settings can be changed (p. 51).

Page 47
Image 47
Canon IXUS 860 IS appendix Indicator, Power Saving Function, Power saving function settings can be changed p