Changing the Image Quality

You can select between two image quality settings.

Select the image quality.

After pressing the m button, press the op buttons to select .

Select an option.

Press the qr buttons to select an option, then press the m button.

XThe setting will display on the screen.

Image Quality Table

Image Quality

(Recording Pixels/Frame Rate)

Content

640 × 480 pixels, 30 frames/sec.

For shooting standard quality movies.

640 × 480 pixels, 30 frames/sec. LP The image quality will be lower than with , but you can record twice the length.

 

Since the number of the recording pixels is

320 × 240 pixels, 30 frames/sec.

smaller, the image quality will be lower than

with

, but you can record three times the

 

 

length.

 

Estimated Shooting Time

Image Quality (Frame Rate)

 

Shooting Time

2 GB

8 GB

 

16 min. 0 sec.

1 hr. 3 min. 57 sec.

 

30 min. 7 sec.

2 hrs. 0 min. 23 sec.

 

40 min. 58 sec.

2 hrs. 43 min. 44 sec.

Based on Canon’s testing standards.

Recording will automatically stop when either the clip file size reaches 4 GB or the recording time reaches approximately 1 hour.

Recording may stop even if the maximum clip length has not been reached on some memory cards. SD Speed Class 4 or higher memory cards are recommended.

86

Page 86
Image 86
Canon IXUS 95 IS manual Changing the Image Quality, Select the image quality, Image Quality Table, Estimated Shooting Time