Changing Shooting Functions

Changing the Image Display Time

You can change the length of time the images display directly after shooting.

Select [Review], then press the qr buttons to select an option.

If you select [Off], the image will not display.

If you select [Hold], the image displays until you press the shutter button halfway.

Changing the Image Display Right After Shooting

You can change the image display that appears after shooting.

Select [Review Info], then press the qr buttons to select an option.

Detailed Displays detailed information (p. 43).

 

The area inside the AF frame is

Focus

magnified, allowing you to check the

Check

focus. The procedure is the same as

 

in “Checking the Focus” (p. 93).

Displaying the Overlay

You can display gridlines for vertical and horizontal guidance, or a 3:2 guide to confirm the printable area for L size or postcard size prints.

[Disp. Overlay], then press the qr buttons to select an option.

Grid Lines

A grid overlays the display.

 

 

 

The areas outside the 3:2 range are

3:2 Guide

grayed out. This area will not print

when printing on paper with a 3:2

 

aspect ratio.

Both

Both grid lines, and the 3:2 guide

will display.

 

112

Page 112
Image 112
Canon IXUS 95 IS Changing the Image Display Time, Displaying the Overlay, Changing the Image Display Right After Shooting