
Nighthawk AC1750 Smart WiFi Router
Disable LED Blinking or Turn Off LEDs
The router LEDs on the top panel indicate router activities and behavior. You can disable LED blinking for network communications, or turn off all LEDs except the Power LED.
To disable LED blinking or turn off the LEDs:
1.Launch an Internet browser from a computer or wireless device that is connected to the network.
2.Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.
3.Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
The BASIC Home screen displays.
4.Select ADVANCED > Advanced Setup > LED Control Settings.
By default, the first radio button is selected, which allows standard LED behavior. For information about standard LED behavior, see Table 1, LED and button descriptions on page 10.
5.To disable blinking, select this radio button: Disable blinking on Internet LED, LAN LED, Wireless LED, and USB LED when data traffic is detected.
6.To turn off the LEDs, select this radio button: Turn off all LEDs except Power LED.
7.Click the Apply button. Your change takes effect.
View WAN Settings
You can view or configure wide area network (WAN) settings for the Internet port. You can set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and enable the router to respond to a ping to its WAN (Internet) port.
To view the WAN settings:
1.Launch an Internet browser from a computer or wireless device that is connected to the network.
Specify Network Settings
104