
Nighthawk AC1750 Smart WiFi Router
The user name is admin. The default password is password. The user name and password are
The BASIC Home screen displays.
4.Select Wireless.
5.In the Region list, select your region.
In some locations, you cannot change this setting.
6.To control the SSID broadcast, select or clear the Enable SSID Broadcast check box.
When this check box is selected, the router broadcasts its network name (SSID) so that it displays when you scan for local WiFi networks on your computer or wireless device.
7.To change the network name (SSID), type a new name in the Name (SSID) field.
The name can be up to 32 characters long and it is
8.To change the wireless channel, select a number in the Channel list.
In some regions, not all channels are available. Do not change the channel unless you experience interference (shown by lost connections or slow data transfers). If this happens, experiment with different channels to see which is the best.
When you use multiple access points, it is better if adjacent access points use different channels to reduce interference. The recommended channel spacing between adjacent access points is four channels (for example, use Channels 1 and 5, or 6 and 10).
9.To change the mode, select it from the Mode list.
At 2.4 GHz, Up to 450 Mbps is the default setting. The other settings are Up to 217 Mbps and Up to 54 Mbps.
At 5 GHz, Up to 1300 Mbps is the default setting, which allows 802.11ac and 802.11a wireless devices to join the network. The other settings are Up to 450 Mbps and Up to 217 Mbps.
10.Click the Apply button.