Nighthawk AC1750 Smart WiFi Router

8.Select the Wireless Repeater radio button.

9.In the Repeater IP Address fields, type the IP address of the repeater router.

This IP address must be in the same subnet as the base station, but different from the LAN IP address of the base station.

10.To prevent wireless clients from associating with the repeater and allowing LAN client associations only, select the Disable Wireless Client Association check box.

You can leave the check box cleared if you prefer wireless clients to be able to associate with the repeater.

11.In the Base Station MAC Address fields, enter the MAC addresses for the access point that will be the base station.

12.Click the Apply button. Your changes are saved.

13.Verify connectivity across the LANs.

A computer on any wireless or wired LAN segment of the router can connect to the Internet or share files and printers with any other computer or server connected to the other access point.

Specify Network Settings

130

Page 130
Image 130
NETGEAR R6700 user manual Specify Network Settings 130