Nighthawk AC1750 Smart WiFi Router
The user name is admin. The default password is password. The user name and password are
The BASIC Home screen displays.
4.Select ADVANCED > Security > Block Services. The Block Services screen displays.
5.Specify when to block the services:
•To block the services all the time, select the Always radio button.
•To block the services based on a schedule, select the Per Schedule radio button.
For more information about how to specify the schedule, see Schedule When to Block Internet Sites and Services on page 64.
6.Click the Add button.
The Block Services Setup screen displays:
7.To add a service that is in the Service Type list, select the application or service. The settings for this service automatically display in the fields.
8.To add a service or application that is not the list, select User Defined and do the following.
a.If you know that the application uses either TCP or UDP, select the appropriate protocol; otherwise, select TCP/UDP (both).
b.Enter the starting port and ending port numbers.
If the service uses a single port number, enter that number in both fields.
To find out which port numbers the service or application uses, you can contact the publisher of the application, ask user groups or newsgroups, or search on the Internet.
9.Select a filtering option:
•Only This IP Address. Block services for a single computer.
•IP Address Range. Block services for a range of computers with consecutive IP addresses on your network.
•All lP Addresses. Block services for all computers on your network.
10.Click the Add button. Your changes are saved.
Control Access to the Internet
63
