Chapter 3 Printing 3-9
Printing
Meeting Size Requirements
When defining the custom form, the size and printer area margins you set
must meet certain requirements.
When setting the custom size:
The width and height must meet the following minimum and maximum
measurements:
❏Width: 3.00 inches (7.62 cm) to 8.50 inches (21.59 cm)
❏Height: 5.00 inches (12.70 cm) to 14.00 inches (35.56 cm).
The height must be greater than the width.
When setting the printer area margins:
The margins must be set as follows (if you set the custom-sized width less
than 8.35 inches (21.20 cm)):
❏Top margin: 0.08 inch (0.20 cm)
❏Bottom margin: 0.24 inch (0.60 cm)
❏Left margin: 0.08 inch (0.20 cm)
❏Right margin: 0.08 inch (0.20 cm).
If you set the custom-sized width greater than 8.35 inches (21.20 cm), you
must calculate the left and right printer area margins as follows:
[width] minus 8.19 inches (20.80 cm) divided by 2 equals [left/right
margin]
For example, if you set the width to 8.50 inches (21.59 cm), calculate the
left and right margins as follows:
8.50 inches (21.59 cm) minus 8.19 inches (20.80 cm) divided by 2
equals 0.155 inch (0.395 cm)
MP330.book Page 9 Tuesday, October 22, 2002 3:21 PM