MCI MODE

AVAILABLE DATA

This projector can project the image data through the PC CARD SLOT, as follows;

The data edited by “Media Card Imager.”

The data of the resolution between VGA (640 X 480) and SXGA (1280 X 1024) in Bit Map type (BMP) or JPEG type (JPG), such as Digital Camera data, can be also displayed.

(Some image data in SXGA size may not be displayed properly. In that case, reset the resolution lower.)

Refer to “SHOW THE DATA IN THE MEMORY CARD” on page 34 to display the image data.

Media Card Imager

Media Card Imager (CD-ROM) is supplied with this projector to edit the image data for projecting. Installation of Media Card Imager is recommended. Refer to Owner’s Manual of Media Card Imager for installation and operation.

AVAILABLE CARD

Compact Flash™ Card (with PCMCIA Adapter) or Type PCMCIA-ATA Card can be used with this projector. (Those memory cards are not supplied with this projector.)

Refer to CF CARD AND PCMCIA ADAPTER on pages 38 and 39 for operation.

NOTE : Some PCMCIA Adapter or PC Card is not available for this projector and cannot provide the image data. In that case, use the optional Canon Compact Flash Card and PCMCIA Adapter.

SELECTING MCI MODE

When the memory card is inserted into PC CARD SLOT, the MCI mode is automatically selected and the first Page of the latest Index is projected onto the screen. To switch to the MCI mode manually, operate as follows.

DIRECT OPERATION

Select MCI mode by pressing the MODE button on the Top Control or the COMPUTER / MCI button on the Remote Control Unit.

MODE button

COMPUTER

COMPUTER / MCI

button

COMPUTER

MCI

MCI

VIDEO

MENU OPERATION

Press the MENU button and the ON-SCREEN MENU will appear.

Press the POINT LEFT/RIGHT buttons to select MCI and press the SELECT button.

33

Page 33
Image 33
Canon LV-7325U owner manual Selecting MCI Mode, MCI Mode Available Data, Available Card