MCI MODE
WRITE DATA INTO THE MEMORY CARD
The data edited by Media Card Imager in the computer can be written to or read from the memory card with the PC Card drive of your Personal Computer or the PC CARD Slot of this projector.
The data edited by Media Card Imager is written in Bit Map type (BMP) or JPEG type (JPG).
ACCESS TO THE MEMORY CARD THROUGH THE PROJECTOR
If your computer doesn't have the PC card writing equipment, the data can be written or read by connecting with this projector.
NOTE : This operation can be made only by Media Card Imager in the Personal Computer.
Connect the projector to the Personal Computer with the Control Cable for Serial Port (optionally supplied / refer to page 12, 13).
1 | Connect the projector to your computer with the Control Cable |
| |
for Serial Port (optionally supplied). (Refer to “CONNECTING |
| ||
| COMPUTER” on Page 12, 13.) |
| |
| Insert the memory card into PC CARD SLOT of the projector. |
| |
| And then, turn on the projector first and then the computer. |
| |
2 | Press the MENU button and the |
| |
| appear. Press the POINT LEFT/RIGHT buttons to select VIEW |
| |
| and press the SELECT button. Another dialog box VIEW | Move the arrow to | |
| SETTING menu will appear. | “Card access” and | |
3 | Press POINT DOWN button and a red arrow will appear. Move | press the SELECT | |
button. | |||
the arrow to Card access by pressing POINT UP/DOWN | |||
|
button. And then press SELECT button. “Ready to access” is displayed.
Operate Media Card Imager of your computer to write/read the data in the PC card. (Refer to Owner's Manual of Media Card Imager for operation.)
NOTE : Connect the projector to the computer with Control Cable before turning those appliances on.
Do not press any button while read/write operations are in progress. Those operations are canceled and the data in the memory card may be damaged.
35
