COMPUTER MODE
AUTO IMAGE FUNCTION
The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers.
1 | Press the MENU button and the | |
| appear. Press the POINT LEFT/RIGHT buttons to select | |
| AUTO IMAGE | and press the SELECT button. |
| Another dialog box AUTO IMAGE Menu will appear. | |
2 | Move the arrow to an item that you want to adjust by pressing | |
the POINT UP/DOWN button. Change the setting On or Off by | ||
pressing the SELECT button.
Fine sync.
Adjust the picture as necessary to eliminate flicker from the display. This item can be adjusted manually. (Refer to page 27.)
Total dots
The number of the total dots in one horizontal period. This item can be adjusted manually. (Refer to page 27.)
Position
Adjustment of the position of the image. This item can be adjusted manually. (Refer to page 28.)
3 | Move the arrow to “Go!” and press the SELECT button to start |
the Auto Image function. |
This adjustment can be executed by pressing AUTO IMAGE button on the Top Control and the Remote Control Unit.
Stored 
Stores the On/Off setting of each item.
Go! | Starts the Auto Image Adjustment. |
|
|
Quit | Closes the AUTO IMAGE ADJUSTMENT Menu. |
Starts the adjustment on the item set to "On".
Close the PICTURE IMAGE ADJUSTMENT Menu.
Move the arrow to the item and then press the SELECT button.
NOTE : The Fine sync. and the Total dots cannot be fully adjusted when “RGB,” “HDTV1035i” or “HDTV1080i” is selected on the SYSTEM MENU (P23 and 26).
The Fine sync., Total dots, and Picture Position of some computers may not be fully adjusted with the Auto Image Function. In that case, manual adjustment is required to make fine image. (Refer to page 27 to adjust "Fine sync." or "Total dots" and page 28 to adjust Picture Position.)
PICTURE POSITION ADJUSTMENT
The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT.
1 | Press the MENU button and the | |
| appear. Press the POINT LEFT/RIGHT buttons to select | |
| POSITION | and press the SELECT button. The PICTURE |
| POSITION dialog box will appear. | |
2 |
| |
Move the image by pressing the POINT UP / DOWN / RIGHT / | ||
LEFT buttons. |
| |
|
|
|
To cancel POSITION mode, press any button except SELECT, RIGHT CLICK, POINT, PAGE ▲/▼ or LASER button. To recall the position previously adjusted, press NORMAL button.
PICTURE POSITION
dialog box
Press the POINT UP /
DOWN / RIGHT / LEFT buttons to move the image
28
