Siemens MC55 AT 24 AT+CSNS Single Numbering Scheme, At+Csns=?, At+Csns?, +CSNS mode, AT+CSNS=mode

7.24AT+CSNS Single Numbering Scheme

The AT+CSNS command enables the ME to accept incoming calls when no bearer capability information is pro- vided with the call, e.g. single numbering scheme calls or calls originating from analog devices.

Syntax

Test Command

AT+CSNS=?

Response(s)

+CSNS: (list of supported<mode>s)

OK

Read Command

AT+CSNS?

Response(s)

+CSNS: <mode>

OK

Write Command

AT+CSNS=[<mode>]

Response(s)

OK ERROR +CME ERROR

Reference(s)

GSM 07.07

PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last

! % % % % % ! ! !

Parameter Description

<mode>(num)

[0](D)	Voice: Each call received without bearer element is assumed to be speech
2	Fax: Each call received without bearer element is assumed to be an incoming
	fax.
4	Data: Each call received without bearer element is assumed to be a data call.
	Please take into account that the bearer service parameters set with AT+CBST
	apply to all data calls including those received without bearer capability.

Notes

•The command must be set before the call comes. By default, when you do not modify the settings, all calls received without bearer element are assumed to be voice.

•The setting will be saved when you power down the ME with AT^SMSO, provided that PIN authentication has been done. The saved value will be restored when the same SIM card is inserted and PIN authentication done again. If no SIM card or a different SIM card is inserted the default value 0 takes effect.

MC55_ATC_V04.00	Page 157 of 475	3/17/06
Confidential / Released