Siemens MC55 AT manual AT&Wvalue, ERROR/+CME Error err

2.3 AT&W Stores current configuration to user defined profile

AT&W stores the currently set parameters to a user defined profile in the non-volatile memory.

Syntax

Exec Command

AT&W[<value>]

Response(s)

OK

ERROR/+CME ERROR <err>

Reference(s)

V.250

PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last

! % % % % % ! ! !

Parameter Description

<value>(num)

[0] Number of profile

Notes

•The user defined profile will be restored automatically after power-up. Use ATZ to restore user profile and AT&F to restore factory settings. Until the first use of AT&W, ATZ works as AT&F.

•AT&W stores all global settings and the current local settings of the interface, on which the command is exe- cuted.

•A list of parameters stored to the user profile can be found in Section 20.5, AT Command Settings stor- able with AT&W.

MC55_ATC_V04.00	Page 32 of 475	3/17/06
Confidential / Released