Siemens MC55 AT manual ATS8?, ATS8=n

7.14 ATS8 Set number of seconds to wait for comma dialing modifier

This command specifies the amount of time, in seconds, that the DCE shall pause, during signalling of call addressing information to the network (dialling), when a "," (comma) dial modifier is encountered in a dial string.

Syntax

Read Command

ATS8?

Response(s)

<n>

OK

Write Command

ATS8=<n>

Response(s)

OK

ERROR

Reference(s)

V.250

PIN	ASC0	ASC1	MUX1	MUX2	MUX3	Charge	 Last
!	%	!	%	!	!	!	! !

Command Description

No effect for GSM.

Parameter Description

<n>(num)(&W)(&V)

0(&F)	DCE does not pause when "," encountered in dial string
1...255	Number of seconds to pause

MC55_ATC_V04.00	Page 141 of 475	3/17/06
Confidential / Released