Siemens MC55 AT manual Dcsnum

<str_urc>(str)(+CSCS)

String type USSD-string .

If <dcs> indicates that GSM 03.38 default alphabet is used TA converts GSM alphabet into current TE character set according to rules of GSM 07.05 Annex A. Otherwise in case of invalid or omitted <dcs> conversion of <str_urc> is not possible.

<dcs>(num)

GSM 03.38 Cell Broadcast Data Coding Scheme in integer format (default 15). In case of an invalid or omitted <dcs> from the network side (MT) <dcs> will not be given out.

<m>(num)

0	No further user action required (network initiated USSD-Notify, or no further
	information needed after mobile initiated operation)
1	Further user action required (network initiated USSD-Request, or further infor-
	mation needed after mobile initiated operation).
	If <m>=1, then the URC ends with ">" to prompt the user for input. The user
	action is finished with <CTRL-Z>or aborted with <ESC>.
2	USSD terminated by network.

Notes

•When a USSD string is sent via ATD, a "AT+CUSD=1" is executed implicitly.

•It is recommended to finalize or escape a pending USSD user interaction before further actions are done to prevent blocking situations.

•If a network initiated operation is left unanswered, several error codes may be output. The first error code is given when the AT command is timed out. Other network indications may follow, depending on the network.

MC55_ATC_V04.00	Page 218 of 475	3/17/06
Confidential / Released