Siemens MC55 AT manual Superscript notation for parameters and values

1.3.2Superscript notation for parameters and values

Table 1.1: Symbols used to mark the type of parameters

Parameter type		Meaning
<param>(num)		Parameter value must be numeric type
<param>(str)		Parameter value must be string type
Table 1.2:	Symbols used to indicate the correlations with other commands
Parameter option		Meaning
<param>(&W)		Parameter value will be stored with AT&W
<param>(&V)		Parameter value will be displayed with AT&V
<param>(ˆSNFW)		Parameter value will be stored with AT^SNFW
<param>(+CSCS)		Parameter value has to be (is) coded according to current setting of <chset> (see
		AT+CSCS for details)
Table 1.3:	Symbols used to mark different types of default values of parameters
Value option		Meaning
[x]		Default value: if the parameter is omitted, the value 'x' will be assumed
x(&F)		Factory default value, will be restored to 'x' with AT&F
x(P)		Powerup default value of a parameter which is not stored at power down
x(D)		Delivery default value of a parameter which cannot be restored automatically

MC55_ATC_V04.00	Page 16 of 475	3/17/06
Confidential / Released