Siemens MC55 AT manual Modenum, Keypnum, Dispnum, Indnum, Bfrnum, IndDescrstr, IndValuenum

Parameter Description

<mode>(num)

0(&F)	Discard "+CIEV" and "^SLCC" URCs.
1	Discard "+CIEV" and "^SLCC" URCs when TA-TE link is reserved, e.g. in
	online data mode. Otherwise they are forwarded directly to the TE.
2	Buffer "+CIEV" and "^SLCC" URCsin the TA while TA-TE link is reserved, e.g.
	in online data mode, and flush them to the TE afterwards. Otherwise they are
	forwarded directly to the TE.
3	Forward "+CIEV" and "^SLCC" URCs directly to the TE. If MC55 is in online
	data mode, URCs are signaled via sending BREAK (100ms) and stored in a
	buffer. Once it is back in command mode e.g. after +++ was entered, all URCs
	stored in the buffer will be output.
<keyp>(num)
0(&F)	Keypad event reporting is not supported by MC55.
<disp>(num)
0(&F)	Display event reporting is not supported by MC55.
<ind>(num)
0(&F)	Disable indicator event reporting.
2	Enable indicator event reporting.
<bfr>(num)
0(&F)	TA buffer of URCs defined within this command is cleared when <mode> 1..3
	is entered.

<indDescr>(str)

Name of indicator; for a list of all supported indicators please refer to AT+CIND and AT^SIND.

<indValue>(num)

Value of indicator; for a list of all values for the supported indicators please refer to AT+CIND and AT^SIND.

Note

•If the ME operates on different instances (MUX channels 1, 2, 3 or ASC0/ASC1) avoid different settings for routing and indicating SMS. For example, if messages shall be routed directly to one instance of the TE (set with AT+CNMI, AT^SSDA), it is not possible to activate the presentation of URCs with AT+CMER or AT+CNMI on another instance. Any attempt to activate settings that conflict with existing settings on another interface, will result in CME ERROR, or accordingly CMS ERROR.

MC55_ATC_V04.00	Page 61 of 475	3/17/06
Confidential / Released