Siemens MC55 AT manual Configuration Commands, AT&Fvalue, Valuenum

2.Configuration Commands

The AT Commands described in this chapter allow the external application to determine the MC55's behaviour under various conditions.

2.1 AT&F Set all current parameters to manufacturer defaults

AT&F sets all current parameters to the manufacturer defined profile. All defined GPRS contexts which are not activated or not online will be undefined (see AT+CGDCONT).

Syntax

Exec Command

AT&F[<value>]

Response(s)

OK

Reference(s)

V.250

PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last

! % % % % % ! ! !

Parameter Description

<value>(num)

[0] Set all TA parameters to manufacturer defaults

Notes

•List of parameters reset to manufacturer default can be found in Section 20.6, Factory Default Set- tings Restorable with AT&F.

•In addition to the default profile, you can store an individual one with AT&W. To alternate between the two pro- files enter either ATZ (loads user profile) or AT&F (restores factory profile).

•Every ongoing or incoming call will be terminated.

MC55_ATC_V04.00	Page 29 of 475	3/17/06
Confidential / Released