Siemens MC55 AT manual Atsals Alternate Line Service, Atsals=?, Atsals?, Sals view, line

8.11AT^SALS Alternate Line Service

The AT^SALS command is designed to support Alternate Line Service. This allows the subscriber to use two voice numbers on the same SIM card (service requires a dual line SIM card).

The write command enables or disables the presentation of <view> and specifies the <line> used for outgoing calls. The read command returns the presentation mode of <view> and the currently selected <line>.

Syntax

Test Command

AT^SALS=?

Response(s)

^SALS:(list of supported <view>s), (list of supported <line>s)

OK

Read Command

AT^SALS?

Response(s)

^SALS: <view>, <line>

OK ERROR

Write Command

AT^SALS=<view>[, <line>]

Response(s)

OK

ERROR

Reference(s)

SIEMENS

PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last

% % % % % % ! ! !

Unsolicited Result Code

If switched on with <view>=1:

^SALS: <line>

Indicates the line used by an incoming call.

Parameter Description

<view>(num)

Controls the presentation mode of the URC "^SALS" which indicates the line number used by an incoming call:

0(&F)(P)	Disables indication of the called line
1	Enables indication of the called line

<line>(num)

Selects the line to be used for outgoing calls. Setting is global for the ME and non volatile.

1(&F)(D)	ALS Line 1
2	ALS Line 2

Note

•If a non ALS SIM is inserted, the <line> will be reset to line 1.

MC55_ATC_V04.00	Page 184 of 475	3/17/06
Confidential / Released