Siemens MC55 AT manual ATSICS=conProfileId, conParmTag, conParmValue, Alphabet, DataType

Write Command

AT^SICS=<conProfileId>, <conParmTag>, <conParmValue>

Response(s)

OK ERROR

+CME ERROR: <err>

PIN	ASC0	ASC1	MUX1	MUX2	MUX3	Charge	 Last
!	%	%	%	%	%	!	! !

Parameter Description

<conProfileId>(num)

0...5	Internet connection profile identifier.
	The <conProfileId> identifies all parameters of a connection profile, and,
	when a service profile is created with AT^SISS the <conProfileId> needs
	to be set as "conId" value of the AT^SISS parameter <srvParmTag>.
<conParmTag>(str)
Internet connection parameter.
"conType"	Type of Internet connection.
	For supported values of <conParmValue> refer to <conParmValue-con-
	Type>.
"alphabet"	Selects the character set for input and output of string parameters within a pro-
	file.
	The selected value is bound to the specific profile. This means that different
	profiles may use different alphabets. Unlike other parameters the alphabet can
	be changed no matter whether the <conParmTag> value "conType" has been
	set.
	For supported values of <conParmValue> refer to <conParmValue-
	alphabet>.
"user"	User name string: maximum 32 characters (where "" is default).
"passwd"	Password string: maximum 32 characters (where ***** is default).
"apn"	Access point name string value: maximum 100 characters (where "" is default).
"inactTO"	Inactivity timeout value in seconds: 0 ... 216-1, default = 20
	Number of seconds the bearer remains open although the service no longer
	needs the bearer connection.
"calledNum"	Called BCD number.
"dataType"	Data call type.
	For supported values of <conParmValue> refer to <conParmValue-
	dataType>.
"dns1"	Primary DNS server address (IP address in dotted-four-byte format).
	This value determines whether to use the DNS server addresses dynamically
	assigned by the network or a specific DNS server address given by the user.
	"dns1" = "0.0.0.0" (default) means that the CSD or GPRS connection profile
	uses dynamic DNS assignment. Any other address means that the Primary
	DNS is manually set.
	The default value applies automatically if no other address is set. Note that the
	AT^SICS read command only returns a manually configured IP address, while
	the value "0.0.0.0" is not indicated at all, no matter whether assumed by default
	or explicitly specified.
	See also note below.

MC55_ATC_V04.00	Page 223 of 475	3/17/06
Confidential / Released