Siemens MC55 AT manual Retrieving Email Polling Mode, Cet

at^siso=1	Open the service that was created to retrieve email
	number 2 from the POP3 server.
OK	The "^SISR" indicates that data is available for read-
^SISR: 1, 1
	ing.
at^sisr=1,500	Try to read 500 bytes.
^SISR: 1, 500	Command response indicates that 500 bytes will be
	transferred, i.e. there will be no other URC since the
	requested length equals the confirmed length.

Return-Path: <subscriber1@testdomain.com>

X-Original-To: subscriber1@testdomain.com

Delivered-To: subscriber2@testdomain.com

Received: from 10.10.0.132 (unknown [10.10.0.132]) by testdomain.com (Postfix) with SMTP id 379321D004

for <subscriber1@testdomain.com>; Tue, 20 Dec 2005 08:00:07 +0100 (CET) To: subscriber2@testdomain.com

Cc:

From: subscriber1@testdomain.com

Subject: TestMail

Message-Id: <20051220070007.379321D004@testdomain.com >

Date: Tue, 20 Dec 2005 08:00:07 +0100

OK	Try to read another 500 bytes.
at^sisr=1,500
at^sisr=1,78	Command response indicates that only 78 bytes will
	transferred.
(CET)
X-UIDL: &lL"!(Z6"!^cl!!1+%"!
Status: RO
Hallo Tom!Bye Bye Tom!	Dot indicates end of mail according to RFC 2821.
.
OK	Parameter <urcCauseId> of the "^SISR" URC
^SISR: 1, 2
	confirms that all data is transferred successfully.
at^sisc=1	Close the service.
OK

10.11.13Retrieving Email (Polling Mode)

This example uses the service profile described in Section 10.11.11.

at^siso=1	Open the service that was created to retrieve email
	number 2 from the POP3 server.
OK	Try to read 1000 bytes.
at^sisr=1,1000
^SISR: 1, 0	Command response indicates that currently no data
	is available.
OK	Again, try to read 1000 bytes.
at^sisr=1,1000
^SISR: 1, 0	Command response indicates that currently no data
	is available.
OK	Again, try to read 1000 bytes.
at^sisr=1,1000
^SISR: 1, 578	Command response indicates that 578 bytes are
	available for reading.

MC55_ATC_V04.00	Page 263 of 475	3/17/06
Confidential / Released