Siemens MC55 AT manual ATV Set result code format mode, Verbose and numeric result codes, ATVvalue

2.5ATV Set result code format mode

This command determines the contents of header and trailer transmitted with AT command result codes and information responses. Possible responses are described in Section 2.5.1, Verbose and numeric result codes.

Syntax

Exec Command

ATV[<value>]

Response(s)

OK

ERROR

Reference(s)

V.250

PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last

! % % % % % ! ! !

Parameter Description

<value>(num)(&W)(&V)

[0]	Information response: <text><CR><LF>
	Short result code format: <numeric code><CR>
1(&F)	Information response: <CR><LF><text><CR><LF>
	Long result code format: <CR><LF><verbose code><CR>

2.5.1Verbose and numeric result codes

Verbose format	Numeric format	Meaning
OK	0	Command executed, no errors
CONNECT	1	Link established
RING	2	Ring detected
NO CARRIER	3	Link not established or disconnected
ERROR	4	Invalid command or command line too long
NO DIALTONE	6	No dial tone, dialling impossible, wrong mode
BUSY	7	Remote station busy
CONNECT 2400/RLP	47	Link with 2400 bps and Radio Link Protocol
CONNECT 4800/RLP	48	Link with 4800 bps and Radio Link Protocol
CONNECT 9600/RLP	49	Link with 9600 bps and Radio Link Protocol
CONNECT 14400/RLP	50	Link with 14400 bps and Radio Link Protocol
ALERTING		Alerting at called phone
DIALING		Mobile phone is dialing

MC55_ATC_V04.00	Page 34 of 475	3/17/06
Confidential / Released