Siemens MC55 AT manual AT+ILRR Set TE-TA local rate reporting, At+Ilrr=?, At+Ilrr?

4.6AT+ILRR Set TE-TA local rate reporting

The command AT+ILRR controls whether or not the intermediate result code "+ILRR" is transmitted from the TA to the TE while a connection is being set up. The result code indicates the local rate. It is issued before the final result code of the connection, e.g. CONNECT, is transmitted to the TE.

Syntax

Test Command

AT+ILRR=?

Response(s)

+ILRR: (list of supported <value>s)

OK

Read Command

AT+ILRR?

Response(s)

+ILRR: <value>

OK

Write Command

AT+ILRR=<value>

Response(s)

OK ERROR +CME ERROR

Reference(s)

V.250

PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last

% % ! % ! ! ! ! !

Intermediate Result Code

+ILRR: <rate>

Indicates local port rate setting upon connection setup.

Parameter Description

<value>(num)(&W)(&V)

0(&F)	Disables reporting of local port rate
1	Enables reporting of local port rate

<rate>(num)

Port rate setting upon connection setup (bps)

0	Autobauding (see Section 4.7.1, Autobauding). Not supported on ASC1.
300
600
1200
2400
4800
9600

14400

MC55_ATC_V04.00	Page 90 of 475	3/17/06
Confidential / Released